*Taxable value of land and structures on it ("additions") is determined regularly by local assessors and does not affect market price.
Zoning
MF-2
Multi Family-Two Residential District
The Multi Family-Two Residential District (MF-2) is established to allow for moderate density of 16 units per net acre with the maximum units per building to be determined at the time of site plan review. Such uses should be located where additional requirements for streets, utilities, drainage, and open space are met. The minimum unit 600 sq ft plus an additional 250 sq ft per each bedroom above 3 bedrooms. Minimum lot size to be 12,000 sq ft. Total number of one-bedroom units shall not exceed more than 60 Percent of all units in a complex. Abundant open spaces, relatively low traffic generation, and appropriate recreation amenities should characterize such areas. These uses should be located in transitional type areas between lower density single-family residential uses and higher density multifamily residential uses, and should be designed in an architecturally unified manner. These uses should not generate traffic through single-family neighborhoods and should be located adjacent to arterials capable of carrying the additional traffic. Multifamily developments are not a buffer between single-family and commercial uses, and should be properly buffered from non-residential land uses and traffic, or from pollution and/or environmental hazards. Multi-family developments should provide basic amenity features prescribed by Appendix W, Section 3